6 - 19
3) After adjusting, tighten the clutch ring nut.
1. Clutch ring nut
2. Clutch screw
TIP
If the specied free play cannot be obtained
as described above or if the clutch does not
operate correctly, have a Benelli dealer check
the internal clutch mechanism.
Checking the brake lever free play
There should be no free play at the brake lever
end. If there is free play, have a Benelli dealer
inspect the brake system.
WARNING
A soft or spongy feeling in the brake lever
can indicate the presence of air in the hy-
draulic system. If there is air in the hydrau-
lic system, have a Benelli dealer bleed the
system before operating the vehicle. Air in
the hydraulic system will diminish the bra-
king performance, which may result in loss
of control and an accident.
Brake light switches
The brake light, which is activated by the bra-
ke pedal and brake lever, should come on just
before braking takes eect.
If necessary, have a Benelli dealer adjust the
brake light switches.
No brake lever free play
1
2
To Next Page
Loading...
Need help?
General
