17.3.2 Fault Diagnosis by Diagnostic Apparatus
Operation Steps：
a) Find the 6-hole diagnostic port on the motorcycle.
b) Connect the harness line to the port on the diagnostic apparatus.
c) Turn on the key to diagnose the faults.
17.3.3 Fault Diagnosis with the Diagnostic Software PCHUD
PCHUD software is used to inspect and record the operating data of the engine. Before using the
software, connect a notebook computer to the 6-hole diagnostic port of the motorcycle with the K
line. The notebook computer needs to install the K line driver software before using.
To Next Page
