Benelli ZAFFERAN 250 - 3. Starter System; 3.1 Preparing documents; 3.2 Failure diagnosis; 3.3 Starter motor

55
3. Starter System
Preparing documents ----------- 3.1
Failure diagnosis ----------------- 3.2
Starter motor ---------------------- 3.3
Starter relay ----------------------- 3.4
3.1 Preparing documents
Note of Work
Disassemble the starter motor on the engine.
For the disassembly of the starter clutch, please comply with regulations.
Preparing principles
Item
Standard
Limit for use
Length of the brush of the startup
motor
12.5mm
8.5mm
Bushing of the startup idler shaft
8.3mm
Outer diameter of the
startup idler shaft
7.94mm
Tightening torque force
Bolts for the clutch cover of the startup motor 12 N·m
Fixing bolts for the clutch of the startup motor 95 N·m
Tools:
Spanner for fixing nuts
Universal fixing spanner