Using your Joybook28
6. Click a network and then click Connect. If security
authentication is not required by the network you are using,
there will be a successful message showing that you have
connected to the network.
• To connect to some networks that require security
authentication, you may have to undergo another
authorization process and enter username and password. For
details, please consult your network administrator.
• For further information, refer to Help and Support in Windows
Vista.
• For data security, it is strongly recommended to connect to
security-enabled wireless networks whenever possible.
• When travelling by air, please be sure to turn off wireless
networking to avoid any possible risks to flight safety.
There are other ways for the Joybook to connect with a network.
See "LAN (Local Area Network) port (RJ-45 connector)" on page
15 and "Modem port (RJ-11 connector)" on page 14.
JB_R56_en.book Page 28 Tuesday, July 3, 2007 10:01 AM
To Next Page
Loading...
