25
Base-2 Security Panel
ENGLISH
2 Zones + 1 24h Balanced 10K Input
Programmable Zone balance: Normally Closed or Balanced 10K
Programmable Operating Mode for Zone 1: Delayed or Instant
Programmable Entry and Exit times of the “Delayed” zone
Programmable Alarm time
Repetitive Alarm Cycles option for persistent Alarms
Battery fuse (protects against polarity inversion)
Peripheral device power supply fuse
Pulse Key for Arming/Disarming from Panel
1 Output Alarm Relay
1 Output Alarm Relay for Indoor Siren
1 Open-collector Output for Trouble signalling
1 Open-collector Output for Alarm delay signal (“Delayed” zone entry
time)
9 LEDs for visual signals
Built-in Buzzer for audible signals
2 Bypass-zone buttons
On-board programming button for BPI Bus device and Key/Card enrollment
Supports up to 4 Key Readers or Proximity Readers for Arm/Disarm and
Bypass/UnBypass operations
Accepts up to 10 Keys and/or Proximity Cards
Houses 12V/7Ah max. rechargeable battery
INTRODUCTION
FEATURES
N.B. At first startup, the Panel cabinet and intergrated power circuit may heat
up, this is due to the initial power charge of the standby battery.
To Next Page
Loading...
