o This is helpful when changing needles or capturing threads in the trap behind the needles.
Presser Foot Adjustment
This will bring the needle to its bottom-most rotation for a better view of the presser foot at this location. This
is used for adjusting the presser foot height against the material.
Maintenance & Settings
Maintenance
Access to maintenance timers and technician screens is found within Maintenance.
· This button will ash if a maintenance procedure is due.
Settings
Here settings such as preferences, design lters, time zones, and network settings can be found.
· This button may ash if a software update is available.
Physical Buttons
Start / Stop
This button will begin or stop sewing. A green or red light will indicate when the button is available for use
and what function is associated with the button.
· Unlit - When unlit, this button has no function. This is usually due to the current screen or state of the
machine.
· Green - When lit green, pressing this button will cause the machine to begin or continue sewing the
currently loaded design.
· Red - When lit red, pressing the button will cause the machine to stop sewing.
· Red while stopped - This indicates a critical error has occurred.
To Next Page
Loading...