Berthold Uni-Probe LB 491 - Setup Protocol

38478BA2B
3 – 232 27.5.08
3 Getting Started via the HART
®
Communicator Volume 3
3.2 Setup Protocol
3.2.1 Parameter list
 Enter the parameters after commissioning into the following
lists to document the start-up process.
TAG No. Date
Isotope Activity
Source No. Detector
Conveyor belt HV
Product
Function Range Setting
Password Configuration
0 - 999999
Password Config. & Calibrate
0 - 999999
Password Full Access
0 - 999999
Date
YY.MM.DD Current date
Time
HH.MM Current time
Descriptor
e.g. LB 491 Vers
Message
Tag
Distributor
Meas. Mode
Isotope
Co, Cs
Unit Selection
Temp. Unit
Error Handling
Time Constant
s
Damping Mode
Interference Mode
Sigma
Pulse Rate Upper Limit
Pulse Rate Lower Limit