Berthold Uni-Probe LB 491 - Parameters for the Function Blocks Analog Input; Parameters for the Function Blocks Analog Output

Uni-Probe LB 491
Berthold Technologies GmbH & Co. KG
7 – 577
Volume 7 3 Parameter Overview
7
3.3 Parameters for the Function Blocks
Analog Input
3.4 Parameters for the Function Blocks
Analog Output
Parameter name Description
CHANNEL Defines which value is output by this function block: density, con-
centration, flow, mass or temperature
Parameter name Description
CHANNEL Defines which value is output by this function block: Flow speed
or temperature.
The parameter is taken into account only when:
-for temperature Using Fieldbus AO has been selected in
FL_TEMPERATURE_COMPENSATION_MODE
- for flow speed Mass_Flow Field Bus AO has been selected in
FL_MEASUREMENT_MODE.