Beta X-Trainer 300 2T - Front Brake; Front Suspension; Rear Brake; Rear Suspension

1
GENERAL INFORMATION
11
GB
FRONT SUSPENSION
Hydraulic fork USD (shafts Ø43 mm)
Spring
............................................................................................... K 8
Oil type ............... see table “Recommended lubricants and liquids”, page 16
Oil quantity ...................................................................................500 ml
Spring preload register ......................................................completely open
Rebound clicks (from completely closed) ..................................................12
Wheel travel................................................................................270 mm
REAR SUSPENSION
Single shock absorber with compound lever
Spring
............................................................................................ K 5,2
Static sag load (see page 41)
.......................................................... 22 mm
Compression clicks, high speeds (from completely closed) .........................15
Rebound clicks (from completely closed)
..................................................10
Shock absorber travel
................................................................... 110 mm
FRONT BRAKE
Ø260 mm disc and dual-piston floating caliper
REAR BRAKE
Ø240 mm disc and single-piston floating caliper