1
Installation, Operation and Maintenance Manual
MAN616_EAC Rev. 5 July 2020
Section 1: General Warnings
General Warnings
Section 1: General Warnings
NOTICE
The manual is an integral part of the machine, it should be carefully read before carrying
out any operation and it should be kept for future references.
1.1 Generalities
Bif Italia s.r.l. actuators are conceived, manufactured and controlled according to the
Quality Control System in compliance with EN-ISO 9001 international regulation.
1.1.1 Applicable Regulation
EN ISO 12100:2010: Safety of machinery – General principles for design –
Risk assessment and risk reduction
2006/42/EC: Machine directive
2014/68/EU: Directive for pressure PED equipment
2014/35/EU: Directive for low voltage equipment
2014/30/EU: Directive for the electromagnetic compatibility
2014/34/EU: Directive and safety instructions for use in hazardous Area
TR TS 004/2011 Customs Union Technical Regulation
(For safety of low voltage equipment)
TR TS 010/2011 Customs Union Technical Regulation
(For safety of equipment and machines)
TR TS 012/2011 Customs Union Technical Regulation
(For safety of equipment operated in explosive atmosphere)
TR TS 020/2011 Customs Union Technical Regulation
(Electromagnetic Compatibility of Technical Products)
TR TS 032/2013 Customs Union Technical Regulation
(For safety of Excess Pressure Equipment)
NOTICE
Bif Italia s.r.l. has taken every care in collecting and verifying the documentation
contained in this instruction and operating manual. Nevertheless Bif Italia s.r.l. does not
provide any guarantees for this instruction manual. Bif Italia s.r.l. will not be responsible
for any mistakes contained in it or for any damage either accidental or due to the use of
this manual. The information herein contained is reserved property of Bif Italia s.r.l. and is
subject to being modied without notice.
To Next Page
Loading...
Need help?
General
