BIFFI ALGAS-QA EAC User Manual

27
Installation, Operation and Maintenance Manual
MAN616_EAC Rev. 5 July 2020
Section 3: Operation and Use
Operation and Use
3.6 Calibration of Micro-switches (If Foreseen)
(Refer to Safety Instructions Manual for limit switch box)
!
WARNING
Refer only to technical documentation related to installed switch-box model.
NOTICE
For mounting interface dimension of the Limit Switch box on the cover of the actuator,
please refer to TN1163V (for metric dimension) or TN1163VU (for imperial dimension).
NOTICE
Operate only the micro-switch corresponding to the direction of operation being carried
out, as clearly reported on the micro-switch. End of stroke microswitches should be
operated before the stop of the stroke of the actuator due to mechanical stops. Adjust the
relative cams properly.

BIFFI ALGAS-QA EAC Specifications

General

Brand	BIFFI
Model	ALGAS-QA EAC
Category	Controller
Language	English