15
Installation, Operation and Maintenance Manual
MAN616_EAC Rev. 5 July 2020
Section 2: Installation
Installation
2.3.3 Valve Stem with Horizontal Axis
The actuator can also be lifted to assemble directly onto the valve with stem with
horizontal axis. To make a correct lifting procedure proceed as follow:
1. Connect properly the actuator lifting points 1 with chains, and connect by suitable
slings the support brackets 2 and 3.
Lifting eyelets (1)
Support brackets (2)
Support brackets (3)
Lifting eyelets (1)
Figure 10
To Next Page
Loading...
