Bilanciai D70A - Page 4

6.1.2 First internal battery charge 1-56
6.2 External battery connection (both D70A and D70B) 1-56
7. ERROR MESSAGES 1-57
8. ERROR MESSAGE CODING 1-59
9. PROGRAMMING OF SERIAL LINE COMMUNICATION 1-61
9.1 Symbols used 1-61
9.2 Strings 1-62
9.2.1 Cb (or Bilanciai) string 1-62
9.2.2 ESTESA string 1-63
9.2.3 Print string 1-65
9.2.4 Cma 1-65
9.2.5 EPC string (EPCSTR) 1-66
9.3 Protocols for serial strings 1-68
9.3.1 ACK-NAK protocol 1-68
9.3.2 Cyclic protocol 1-68
9.3.3 On Request protocol 1-68
9.4 Remote commands protocol 1-69
9.4.1 Reply to an incorrect command 1-70
9.4.2 Reply to a correct command 1-70
9.4.3 Suspension of cyclic transmission 1-70
9.4.4 Resumption of cyclic transmission 1-70
9.4.5 Request for gross weight 1-71
9.4.6 Request for net weight 1-71
9.4.7 Request transmission of tare 1-71
9.4.8 Request transmission of scale status 1-71
9.4.9 Request transmission of scale status (version EV2001) 1-73
9.4.10 Scale zeroing 1-74
9.4.11 Tare acquisition 1-74
9.4.12 Tare entering 1-74
9.4.13 Cancellation of an entered tare 1-74
9.4.14 Request for transmission of the general data table 1-74
9.4.15 Request for general data item indicated with "n" 1-75
9.4.16 Request for entry of the "y" value in the general data item indicated
with "n" 1-75
9.4.17 Request for transmission of the net weight and the scale status 1-75
9.4.18 Request division value 1-76
9.4.19 Request for net weight in high resolution 1-76
9.4.20 Request for maximum capacity value 1-76
9.4.21 Lock keypad 1-76
9.4.22 Unlock keypad 1-76
9.4.23 Remote commands with addressing 1-77
10. PERSONALIZATION 1-79
10.1 Foreword 1-79
10.2 Accessing the parameter configuration function 1-79
10.3 Description of the menus and submenus 1-80
10.4 NOVRAM menu 1-80
10.4.1 D.PERS submenu to personalize the instrument 1-81
10.4.2 COM1 / COM2 sub-menu 1-84
10.4.3 U.ANALO sub-menu (D70B version only) 1-86
D70
1-4