6.1.2 First internal battery charge
This must be done when new batteries are installed, if the batteries are
very low or if the terminal has not been used for a long time.
To restore this function, connect the battery charging adapter to the
terminal, connect the adapter to the mains and switch the terminal on;
select YES in the ISTCHG menu.
WARNING
While charging, the terminal must not be switched off.
Charging is complete when the indication on the display
goes out.
6.2 External battery connection (both D70A and D70B)
A 12V external battery can be connected with a "jack" connector (point 1
of Figure 3.1 on page 1-23 and point 1 of Figure 3.2 on page 1-24).
D70
1-56
To Next Page
Loading...
