9.4.9 Request transmission of scale status (version EV2001)
XS<CR> (XSb<CR>)
In the case of a positive reply, the terminal responds with the following
string:
<s1><s2><CR><LF>
The characters s1 and s2 are ASCII characters that must be interpreted
as hexadecimal values.
The bits indicate the scale status as follows.
<s1> bit 0 in range
bit 1 weight stable
bit 2 centre zero
bit 3 displayed net weight
<s2> bit 0 not utilised
bit 1 not utilised
bit 2 not utilised
bit 3 print request: the print key has been pressed or
input n° 3 is activated.
D70
1-73
To Next Page
Loading...
