6. OPTIONS
6.1 Internal battery connection option (version D70A only)
Optional batteries can be installed to allow the terminal to operate
without the electricity main. The terminal will operate for about 16
(indicative) hours if connected to a scale with one single load cell and if
the display is used at low lighting intensity. This autonomy becomes less
if more load cells are used or if the high lighting intensity remains
permanently on. The batteries are charged by the terminal as soon as
the electricity main is connected again.
Battery recharging takes about 8 hours if the batteries are very low. The
PWRSUP indication appears whilst the batteries are being recharged. To
insert the batteries, comply with the instructions on the label in the
terminal's battery compartment (point 5 of Figure 3.1 on page 1-23).
The battery option includes the supply of 6 rechargeable Nickel Metal
Hydrate batteries (Ni-MH) AA and a standard adapter.
WARNING
The NOPWR message will appear if the terminal is powered in
the battery operating mode.
WARNING
The instrument can also operate with non-rechargeable AA
alkaline batteries.
Do not connect the standard adapter when alkaline batteries
have been installed as this could damage the instrument.
D70
1-53
To Next Page
Loading...
