AUTOFF NO
The AUTOMATIC SWITCH-OFF function is
not activated
YES
The AUTOMATIC SWITCH-OFF function is
activated
Enables the piece counter function
PIECES
AN.DATA Function that allows two voltage or current
values and a reference weight to be
programmed.
To enable the function, select REFWGT in the
U.ANALO menu in NOVRAM.
CURR-0/VOLT-0
Current value zero/voltage value zero
CURR.RF/VOLT.RF
Reference current value/Reference voltage
value
REF.WGT
Reference weight
WARNING
The TIMER function can be used to optimize battery
consumption which will be greater when the display operates
at maximum light intensity (version D70A only).
D70
1-47
To Next Page
Loading...
