✔
Press to display the average unitary weight calculated. If the unit
of measurement selected is kg and the AUW is less than 1 kg, the
AUW value will be displayed in g. The AUW is always positive.
✔
if the weight fails to stabilize, the WAIT message will remain on the
display and the operator can quit the procedure by pressing . The
previous AUW will remain (if already calculated).
The AUW resets whenever the terminal is switched off.
The calculated AUW is retained in the memory if the operator switches
from the PIECES mode to the WEIGHT mode.
D70
1-49
To Next Page
Loading...
