BINDOMATIC 301 DFS - Placing Your Bindomatic 301 DFS

Introduction 5
Placing your Bindomatic 301 DFS
For reliable 301 DFS operation and document quality, Bindomatic recommends the
guidelines below.
• Place the 301 DFS in a well-ventilated room.
• Ensure that the room temperature and relative humidity are within the following ranges:
– Temperature: 17° C (63° F) to 32° C (90° F)
– Relative humidity: 15% to 85%
• Place the 301 DFS on a flat, level surface. Ensure that the 301 DFS is aligned to your
copier/printer for optimum performance.
• Avoid locations that subject the 301 DFS to the following conditions:
– Direct sunlight which may make the screen difficult to see
– Extreme changes in temperature or humidity
After selecting a location that meets the preceding guidelines, ensure that the 301 DFS has
sufficient space around it for service, if required. The diagrams below illustrate the service
space requirements.
Service space requirements