EasyManua.ls Logo

BINDOMATIC 301 DFS - Storing the Cover Cassettes

Default Icon
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance 49
Storing the cover cassettes
Follow the procedure below for proper storage of the cover
cassettes.
1. Store the cartons containing the cover cassettes so that the
arrow on the outside of the carton points upward.
Do not stack the cartons more than four high.
Do not store the cartons above 30° C (8F) and 80%
relative humidity.
Store the cartons away from moisture and direct
sunlight.
WARNING: Do not store the cassettes standing on end (the
way in which they are positioned in the Cover Trays). Doing
so could cause the covers to become deformed. This will affect
both the appearance of the covers and 301 DFS performance.
If you experience frequent misfeeds from the Cover Trays,
refer to chapter 6, ”Problem solving”, for problem resolution.
WAR N I NG : B e c a re f u l n o t to damage the bar codes
when storing the individual cassettes. If a bar code is
unreadable due to damage, the 301 DFS will not be
able to determine the type, color and spine width of
the covers contained in the cassette.
2. Store any cover cassettes removed from the cartons so that
the slotted side (i.e., the side opposite the bar code) is
facing up, or down.
This is the same direction in which the cassettes are
stored in the cartons.
3. Cassettes left in machine should be taken out when not
used within 2 - 4 days or prior to weekend or holliday
period.
A professional
i
A professional impression.

Table of Contents