26 Making the documents
Cover Tray currently in use empties
When the Cover Tray currently in use empties, the following
will occur:
• The Sound Tone, if enabled, will beep twice.
• The Message Display on the Control Panel of the 301 DFS
will advise you to ”Add Covers to Tray X” (if you have
selected Cover Tray 1 and Cover Tray 2) or ”Check
Cover Supply in Tray X” (if you have selected Cover
Tray 1 or Cover Tray 2).
• The green light to the left of the Cover Tray selection on
the Control Panel of the 301 DFS will flash.
• The Cover Tray light on the Mimic Display will go on.
• The Cover Tray will automatically unlock and the green
Ready to Open indicator light will go on.
• The Supply Level indicator lights on the Cover Tray will
go out.
• The 301 DFS will stop accepting copy sets, but will
continue processing the documents already in progress.
Perform the following in order to proceed with the document
production:
• Replace the empty cassette with a new cassette containing
the same cover.
• Press Manual Start
Cover Tray not currently in use is empty
When the Cover Tray not currently in use is empty, the
following will occur:
• The Message Display on the Control Panel of the 301 DFS
will advise you to ”Add Covers to Tray X” (if you have
selected Cover Tray 1 and Cover Tray 2) or ”Check
Cover Supply in Tray X” (if you have selected Cover
Tray 1 or Cover Tray 2).
• The Cover Tray light on the Mimic Display will stay on.
• The Cover Tray will remain unlocked and the green Ready
to Open indicator light will stay on.
• The Supply Level indicator lights will remain unlit.
To Next Page
Loading...