___________________________________________________________________
18 Libra S21/S22, English Issue 02 - 04/2004
ACCESSORIES
If an accessory is changed, press the accessory button on the home page (F2) to
initialise the instrument in order that the appropriate accessory can be identified.
Depending on the accessory type, a list of options is presented.
Multiple Cell Holder Accessories
•
Install by removing accessory in place, replacing with the new one, turning the
central mounting screw until it is finger tight and pressing the accessory button
on the home page.
• All multiple cell holders have the option of being used as a single cell holder.
This means that there will be no rotation after pressing run.
Description Part number Comments
4 position cell changer 80-2106-01 Accommodates cells 10-50mmm in
pathlength
8 position water heated
cell changer
80-2109-70 Requires a water-circulating bath.
Locate round extension of tube
restrainer into top of cell changer
thumb screw. Thread tubes through
the tube guide and attach this to the
instrument base using the screws
provided. Replace the front blanking
plug on the cell compartment lid with
the new one that is provided.
6 position Peltier heated
cell changer
80-2106-04 Requires Temperature Control Unit
(80-2112-49). Insert into socket 1.
8 position cell changer 80-2108-01 Spare, if required
To Next Page
Loading...
