___________________________________________________________________
24 Libra S21/S22, English Issue 02 - 04/2004
APPENDIX
Text entry
The following example shows how to enter a title and equation in Multiwave. The
principles are identical, however, for other text entry options such as Method Names.
• To enter the title “Copper 10”:
• Use ← to remove any text still there
• Press 2 repeatedly until “C” appears
• Press 6 repeatedly until “o” appears
• Press 7 repeatedly until “p” appears
• Press F2 to move to next place
• Press 7 to enter a second “p”
• Press 3 repeatedly until “e” appears
• Press 7 repeatedly until “r” appears
• Press 1 to initiate entry of a space
• Press F2 to move to next place, then F2 again to enter the space
• Press 1 repeatedly until “1” appears
• Press 0 to enter “0”
• Press OK (F3) to confirm the name entry
• To enter the equation “((Abs511*12.5) – (Abs 720*0.3))*100”
• Use ← to remove any entries still there
• Press F2 twice to enter “((“
• Press F1,1 to enter the first absorbance, A1 (wavelength value is defined later)
• Press F1, 3 to enter the * sign
• Enter numerical factor 12.5 using the keypad, press F3
• Press F2 to close the first bracket, “)”
• Press F1, 2 to enter the minus sign
• Press F2 to enter “(“
• Press F1, 2 to enter the second absorbance, A2 (wavelength value is defined later)
• Press F1, 3 to enter the * sign
• Enter numerical factor 0.3 using the keypad, press F3
• Press F2 twice to close the brackets, “))”
• Press F3 to confirm the equation is correct
• The two wavelengths for A1 and A2 now have to be defined, enter 511 and 720
when prompted
The dilution factor (*100) now has to be entered; enter 100
To Next Page
