___________________________________________________________________
20 Libra S21/S22, English Issue 02 - 04/2004
Other Accessories, consumables etc
Description Part number Comments
Sipper 80-2112-25 Use if a large number of samples for
single readings is required.
Requires single cell holder (80-2106-05
or 80-2106-13). 10mm flowcell and
tubing supplied, together with separate
user instructions.
Temperature Control
Unit
80-2112-49 Required to supply the extra power
required by the 6 position Peltier heated
cell changer (80-2106-04).
Printer stand 80-2112-18 For thermal printer
Dust cover 80-2106-19 Spare
Consumables and other items
Pump head tubes (6) for Sipper 80-2080-74
PTFE flowcell tubing with connectors 80-2055-13
Replacement flowcell (including tubing) 80-2080-60
Autosampler Interface kit 80-2104-96
Serial interface cable for connection to PC
(D9 male instrument to D9 PC)
80-2105-97
Spreadsheet Interface Software 80-2112-23
Centronics parallel printer interface cable 80-2071-87
Separate information giving details on serial and parallel interface connections, if
required, is available from a Service Engineer with your local supplier, whom you
should contact for further details.
To Next Page
Loading...
