biodex 950-401 - Page 110

110 Biodex Medical Systems, Inc. © 2017
A
B
C
D
E
F
33
ImpAmndAvgStepLengt
h
0
34
ImpAmndCOV
0
35
ImpAmndTOF
0
36
Data start
37
41
55
57
61
38
41
59
57
61
…
…
…
…
…
…
…
…
…
…
65
41
57
61
61
66
41
56
58
61
67
41
54
59
61
68
41
54
58
61
69
41
56
59
61
70
Data end
CSV File Format Explanation – Single Record CSV File
The CSV file can be divided into two different segments:
1. Device, Patient, Test results segment.
2. Raw Data points segment.
Segment A – Device, Patient, Test Results:
Starting from the top of the file, the Gait Test file format displays the device information
and patient information followed by the different test results. The left column contains
the heading/label and the right column(s) displays the corresponding values.
For this Gait Trainer example, the test/exercise results are included with G-Code
information. Any Gait Trainer exercise performed with the G-Code functionality turned
on will have additional fields (as illustrated below).
Table A.2. Single Test Export CSV File – Field Heading Definitions.
Field Heading
Description
Name
The patient’s name.
Patient ID
Patient ID.
TestDateTime
Date and time the test is performed.
Height
Height of the patient in CMs.
DOB
Patient’s date of birth.
GenderID
Male = 1, Female = 2.
ElapsedTime
Total test time in seconds.
TestDistance
Total distance of the exercise in meters.
AvgSpeed
Average walking speed in meters/sec. The first two columns display the norm value and the
third column displays the actual exercise value.
AvgStepCycle
Average Step Cycle. The first two columns display the norm value and the third column
displays the actual exercise value.
AvgStepLength
Average Step Length in CMs. The first two columns display the normative value and the third
column displays the actual exercise value for the right leg. The fourth column represents the