GAIT TRAINER 3 (v3.X SOFTWARE) 37
Associating G-Code Data
The G-code screen is accessed from the Patient Setup screen in the Gait Trainer interface.
Touch the <G-code> icon to access this screen.
Figure 5.2. Patient Setup screen in the Gait Trainer interface. Using the G-code icon,
a user can access the drop-down menus needed for associating G-code
data.
At this screen, the G-code data can be associated with the patient by making selections in the
drop-down menus.
The top drop-down menu allows the user to select a G-code Result Option. This means that the
Exercise Summary Report will feature the Impairment %, the Severity Modifier Code, or both. If
the drop-down menu is set to Off, the Exercise Summary Report will show neither column and
the G-code icon on the Patient Setup screen will have a red (as opposed to green) dot on it.
Figure 5.3. G-code Calculator Options screen in the Gait Trainer interface. The first
drop-down menu allows the user to customize the G-code data that will
appear on the Gait Training Test Results.
To Next Page
Loading...
