Biosite Triage Meter Pro - Page 24

Rev AN-14
DI
SPLAY
SE
TTINGS
LA
NGUAGE
This setting will determine which language the meter displays.
1. From a list of programmable parameters, choose
ME
TER
SE
TTINGS
using keys.
2
. Press the key.
3. Use the keys to select DI
SPLAY
SE
TTINGS
.
4. Press the key.
5. Use the keys to highlight the name to the right of
LANGUAGE.
6. Use the keys to change the language of the Triage MeterPro’s screen.
7. Press the key to save changes.
PRINT MODE
This setting will determine if the meter prints automatically or only when requested.
1. From a list of programmable parameters, choose METER SETTINGS
using keys.
2. Press the key.
3. Use the keys to select DISPLAY SETTINGS.
4. Press the key.
5. Use the keys to select highlight the word to the right of PRINT MODE.
6. Use the
keys to choose
AUTOMATIC or MANUAL. If AUTOMATIC is
selected, the meter will immediately print out the results after each test (patient or
QC). If
MANUAL is selected, the user must use the button on the keypad to
print out results.
7. Press the key to save changes.
MAIN MENU
SET PARAMETERS
METER SETTINGS
DISPLAY SETTINGS