Biosite Triage Meter Pro - Page 25

Rev A N-15
AU
TO
PO
WER
–
O
F
F
T
his setting will determine the length of time before an inactive meter will power off.
1
. From a list of programmable parameters, choose
ME
TER
SE
TTINGS
u
sing keys.
2. Press the key.
3. Use the keys to select DI
SPLAY
SE
TTINGS
.
4. Press the key.
5. Use the keys to select the value to the right of
AU
TO
PO
WER
-OF
F
.
6. Use the keys to choose the desired timer setting for the meter to power
itself off when not in use. The choices are:
1
/2 H
OUR
, 1 H
OUR
, 2 H
OURS
, 4 H
OURS
or NONE. If NONE is selected, the meter must be manually shut off using the
on/off key.
7. Press the key to save changes.
DISPLAY CONTRAST
This setting will adjust the display contrast.
1. From a list of programmable parameters, choose METER SETTINGS
using keys.
2. Press the key.
3. Use the keys to select DISPLAY SETTINGS.
4. Press the key.
5. Use the keys to select the number to the right of
CONTRAST.
6. Use the keys to change the contrast of the meter’s screen.
The range is from 0 – 8 (8 being the greatest contrast).
7. Press the key to save changes.
MAIN MENU
SET PARAMETERS
METER SETTINGS
DISPLAY SETTINGS
Note: When
powered only
by batteries, select
1
/2 hour to conserve
battery life.
Certain screens,
when displayed, will
not automatically
power off. The New
Results screen is an
example.