Biosite Triage Meter Pro - Page 32

Rev AN-22
UP
DATE
US
ER
I
D
1
. From the list of programmable parameters, choose
US
ER
I
D
u
sing keys.
2. Press the key.
3. Select
UP
DATE
US
ER
ID using keys.
4. Press the key.
5. Type in the user number you want to update. To correct, press the key
to clear the entire number, or select the incorrect digit by using the
keys. Then type in the correct number.
6. Press the key.
7.
The user ID is displayed with the expiration date. You can change the expiration
date to
6 M
ONTHS
, 12 M
ONTHS
, E
XPIRED
or VALID by using the keys.
VA
LID
reconfirms the previously selected interval.
8. Press the key to save changes.
DELETE USER ID
1. From the list of programmable parameters, choose USER ID
using keys.
2. Press the key.
3. Select DELETE USER ID using keys.
4. Press the key.
5. Type in the user number to be deleted. To correct, press the key
to clear the entire number, or select the incorrect digit by using
the keys. Then type in the correct number.
6.
Press the key. The message on the screen states:
USER ID ### WILL BE DELETED.
7. Press the key to delete. A message on the screen tells you that the
number has been deleted: USER ID ### DELETED.
MAIN MENU
SET PARAMETERS
USER ID
N
ote: If you
t
ype in a
User ID number that
does not exist, the
message on the
screen states:
USER ID ### DOES
NOT EXIST
.
If this happens, press
the
ENTER key to
return to the previous
screen and correct
the ID number, or
press the
EXIT key.
Note: If you
type in a
User ID number that
does not exist, the
message on the
screen states:
USER ID ### DOES
NOT EXIST
.
If this happens, pr
ess
the
ENTER key to
return to the previous
screen and correct
the ID number, or
press the
EXIT key.