3.7.4 Volume control
1. Alarm Volume
Select 【Volume】smart hotkey → “Volume Setup” menu.
Select “Alarm Volume”: Set alarm volume from 1 to 9.
2. QRS Volume
Select 【Volume】smart hotkey → “Volume Setup” menu.
Select “QRS Volume”: Set QRS volume from 0 to 9. 0 means off.
3. Pulse Volume
Select 【Volume】smart hotkey → “Volume Setup” menu.
Select “Pulse Volume”: Set pulse volume from 0 to 9. 0 means off.
4. Touch Volume
Select 【Volume】smart hotkey → “Volume Setup” menu.
Select “Touch Volume”: Set touch volume from 0 to 9. 0 means off.
5. Key Volume
Select 【Volume】smart hotkey → “Volume Setup” menu.
Select “Key Volume”: Set key volume from 0 to 9. 0 means off.
3.7.5 Setting parameter unit
You can select a preferred unit through the following operations
Select [Settings]Smart Hotkey or press [Setting] key on the monitor panel →
“Settings”.
Select “User Maintenance >>” → enter the password and confirm →“User Maintenance”
menu.
Select “Unit Setup >>” →“Unit Setup” menu.
Select “Height Unit”, and select the unit “cm” / “inch” as needed.
Select “Weight Unit”, and select the unit “kg” / “lb” as needed.
To Next Page
