High priority alarm: Beep-beep-beep--beep-beep----beep-beep-beep--beep-beep
Medium priority alarm: Beep-beep-beep
Low priority alarm: Beep
6.3.3 Alarm information
Alarm information displayed on the physiological or technical alarm area of the monitor
indicates the corresponding alarm information when an alarm occurs. The system will
distinguish the alarm priority with different background colors:
High priority alarm: Red
Medium priority alarm: Yellow
Low priority alarm: Yellow
The following flags in front of physiological alarms are used to distinguish the alarm priorities.
High priority alarm: ***
Medium priority alarm: **
Low priority alarm: *
6.3.4 Parameter flashing
When the physiological parameter values in the parameter area will flash once per second, and
the upper limit and lower limit of the parameter will also flash at the same frequency, it
indicating that the parameter exceeds the upper limit or lower limit.
To Next Page
