6.4.4 Alarm off
As shown in 6.4.3, if the “Alarm Pause Time” is set to “Permanent”, press the [Pause] smart
hotkey or [Alarm pause] key on the monitor panel, and the monitor will turn off the alarm.
In this case, except the alarm prompt characteristics maintained in alarm pause state:
[Pause] smart hotkey will appear magnified icon.
The physiological alarm area displays “Alarm Pause”.
You can press the [Pause] smart hotkey again to manually cancel the alarm off.
If the monitor is in the alarm state of suspension or high priority technical alarm is triggered,
the alarm and the alarm off pause are automatically canceled.
To Next Page
