CYCLOPS-I BT Scanner Configuration Guide 44
Data Transfer Format Setting under SPP Mode
When CYCLOPS-I is configured in Batch Mode or Hybrid Mode, if there is any records
remained ( not uploaded, not deleted ) in <data.txt> file in the memory, the following
configuration change can not be allowed.
Setting Barcodes of Prefix
Prefix setting must be 2-digit word, and the word can only be 0~9, A ~ F. For example, to set
“，” as Prefix, you have to scan the barcode ID “B019A” first, then, “3”, “3”, and
“EOC”.
Please use barcodes listed in <9.2.6 Setting Barcodes of Alpha-Numeric Entries> to set up
the Prefix needed for scanned data.
To Next Page
Loading...