50
VOLTage subsystem
VOLTage <value>
Description：set the test level (only effective in L,C,R,Z)
Parameters are 0.3, 0.6, 1 or 3e-1,6e-1,1e0
Example： VOLTage 0.3
Set the test level to 0.3 V
VOLTage?
Description: set the current test level
FUNCtion subsystem
FUNCtion:impa < L | C | R | Z | DCR >
Description: Select the primary parameter
Example: FUNCtion:impa L
Selects L as the primary parameter
FUNCtion:impa?
Description: Query the primary parameter
Return: <L, C, R, Z, DCR, NULL >
FUNCtion:impb < D | Q | THETA | ESR >
Description: Select the secondary parameter (only effective in L,C,R,Z)
Example: FUNCtion:impb D
Select D as the secondary parameter
FUNCtion:impb?
Description: Query the secondary parameter (only effective in L,C,R,Z)
Return: <D, Q, THETA, ESR, NULL>
FUNCtion:EQUivalent < SERies | parallel | PAL >
Description: Set the equivalent mode
(only effective in L,C,R,Z)
Parameters: SERies — series mode
Parallel — parallel mode
Pal — parallel mode
Example: FUNCtion:EQUivalent SERies
Set the equivalent mode to series mode
FUNCtion:EQUivalent?
Description: Query the equivalent mode
To Next Page
Loading...
Need help?
General
