Black Box LEV2525A - 17 Gvrp; GVRP (GARP VLAN Registration Protocol)

MNS-BB Software User Guide
-92-
3. Click on [Tag-Based].
4. Click on [Add] to add Vlan.
5. Enter Vlan ID, Vlan Name and select Port Members.
6. After you make the desired changes, click on [OK] button.
7. Click [Save] to save the configuration.
Similarly, You can delete the Vlan.
1. Click on the [Configuration].
2. Click on [Vlan].
3. Click on [Tag-Based].
4. Click on [Delete] to delete Vlan.
5. Select Vlan ID to delete from the drop down list.
6. After you make the desired changes, click on [OK] button.
7. Click [Save] to save the configuration.
This menu also gives the facility to configure Ingress and Egress rules by clicking [Ingress] or
[Egress] button.
To view Ingress or Egress Rules (Filter)
1. Click on the [Configuration].
2. Click on [Vlan].
3. Click on [Ingress] or [Egress] Filter.
It will show the Ingress and Egress rules.
17.0 GVRP
17.1 GVRP (GARP VLAN Registration Protocol)
The above is an application of the Generic Attribute Registration Protocol (GARP). GVRP is defined
in the IEEE 802.1Q standard, and GARP is defined in the IEEE 802.1P standard.