MNS-BB Software User Guide
-12-
4.4 User Management
You may want to create both a username and password to create access security for your switch.
There are two levels of access to the interface that can be controlled by setting user names and
passwords:
Operator: An Operator-level user name and password allows read-only access to most of the web
browser interface, but prevents access to the Configuration.
Manager: A Manager-level user name and password allows full read/write access to the web browser
interface.
To Set the Device Passwords Window
4.4.1 To set the passwords
1. Go to Administration-Æ User Management
2. Click in the appropriate box in the Passwords window and enter user names and passwords. You
will be required to repeat the password strings in the confirmation boxes.
3. Click on [OK] to modify the user names and passwords.
Note: Passwords you assign in the web browser interface will overwrite previous passwords assigned
in the web browser interface, the Command Prompt, or the switch console. That is, the most recently
assigned passwords are the switch’s passwords, regardless of which interface was used to assign the
string.
To Next Page
Loading...
