MNS-BB Software User Guide
-99-
advertising devices. Similarly, the switch advertises its static VLANs to other GVRP-aware devices.
A GVRP-enabled switch does not advertise any GVRP-learned VLANs out of the port(s) on which it
originally learned of those VLANs.
17.12 Web: View and Configure GVRP Parameters
In the web browser interface:
1. Click on the [Configuration].
2. Click on [Vlan].
3. Click on [GVRP].
4. Click on toggle button to enable or disable GVRP.
5. After you make the desired changes, click on [OK] button.
6. Click [Save] to save the configuration.
Through this menu you can also change the Port State to ‘block’ or ‘learn’ of a specific port.
For web-based Help on how to use the web browser interface screen, click on the [Help] button
provided on the web browser screen.
To Next Page
Loading...
