Black Box LEV2525A - Web: View and Configure 802.1 X

MNS-BB Software User Guide
-116-
19 -- --
20 -- --
21 -- --
22 -- --
23 -- --
24 -- --
25 Enabled 3600
-- Port not available
show-stats:
This commands displays per-port authentication statistics.
Syntax:
show-stats port=<num>
LE2425A(auth)##show-stats port=3
Port 3 Authentication Counters
authEntersConnecting : 3
authEapLogoffsWhileConnecting : 0
authEntersAuthenticating : 3
authAuthSuccessesWhileAuthenticating : 2
authAuthTimeoutsWhileAuthenticating : 0
authAuthFailWhileAuthenticating : 0
authAuthReauthsWhileAuthenticating : 0
authAuthEapStartsWhileAuthenticating : 1
authAuthEapLogoffWhileAuthenticating : 0
authAuthReauthsWhileAuthenticated : 0
authAuthEapStartsWhileAuthenticated : 0
authAuthEapLogoffWhileAuthenticated : 0
backendResponses : 5
backendAccessChallenges : 2
backendOtherRequestsToSupplicant : 0
backendNonNakResponsesFromSupplicant : 2
backendAuthSuccesses : 2
backendAuthFails : 0
trigger-reauth :
This command manually initiates a re-authentication of supplicant.
Syntax: trigger-reauth port=<num|list|range>
LE2425A(auth)##trigger-reauth port=3
Successfully triggered re-authentication
21.5 Web: View and Configure 802.1x
In the web browser interface:
1. Click on the [Configuration].
2. Click on [802.1x].
3. Click on [Server].
4. Click on [EDIT] to add or edit Radius Server information.
5. After you make the desired changes, click on [OK] button.
7. Click [Save] to save the configuration.
For 802.1x Port Settings
1. Click on the [Configuration].
2. Click on [802.1x].
3. Click on [Port].
4. Click on [Set/Access/Backend/Reauth/Stat] to add or edit the information.