MNS-BB Software User Guide
-11-
Note: If you want security beyond that achieved with user names and passwords, you can disable
access to the web browser interface. This is done by executing ‘allow’ command in ‘access’ module
at the Command Prompt. (For more details please refer Chapter 7).
Switch Configuration:
• Ports
• Port Setting
• Port Security
• Port Mirroring
• VLAN
• Port Vlan
• Tag Vlan
• GVRP
• Bridging
• Aging
• Address Table
• ARP Table
• STP/RSTP
• Bridge STP/RSTP
• Port STP/RSTP
• Link Loss Learn
• S-Ring (Optional)
• 802.1x
• SMTP
• QoS
• SNTP
• IGMP
• Logs
• Event Log
• Statistics
• Port statistics
• Log statistics
• Software/OS upload (File Management)
• TFTP
• FTP
• Telnet
• Ping
4.3 Session with the Switch
1. You can start a web browser session using a standalone web browser on a network connection
from a PC or UNIX workstation:
• Directly connected to your network
• Connected through remote access to your network
• Compatible with Netscape 4.x onwards and Microsoft Internet Explorer 5.x onwards.
2. Type the IP address (or DNS name) of the switch in the browser Location or Address field and
press [Enter].
LE2425A or LEV2525A [Enter] (example of a DNS-type name)
10.11.12.180 [Enter] (example of an IP address)
If you are using a Domain Name Server (DNS), your device may have a name associated with it (for
example, LE2425A) that you can type in the Location or Address field instead of the IP address.
Using DNS names typically improves browser performance.
Note: See your network administrator for any name associated with the switch.
To Next Page
Loading...
