MNS-BB Software User Guide
-59-
LE2425A(qos)##show qos
To see the QoS type
LE2425A(qos)##show qos type=port
To set QoS type Tag,
This command will set the bits making tag levels 0, 4 and 7 high priority.
LE2425A(qos)##setqos type=tag port=6-10 tag=0,4,7 priority=high
To show the tag level (0-7)
LE2425A(qos)##show qos type=tag
Note: The default setting for traffic class is the low priority queue.
All tagged frames will be directed to either the low or high priority queue as specified.
11.9 To tag untagged packets.
When a packet is received untagged and has to be transmitted, with an addition of 802.1Q
tag on transmit, then 802.1p priority tag is assigned depending on the untag value set. Hence if you
set untag port=1 tag=2 priority=low, untagged packets received on that port will be tagged with a
priority low upon transmit.
set-untag : The 802.1p user priority assigned to untagged received packets to be transmitted as
tagged from the priority queue 1/0.
To Next Page
Loading...
