MNS-BB Software User Guide
-49-
LE2425A(port-mirror)## prtmr enable
Port Mirroring Enabled
LE2425A(port-mirror)## prtmr disable
Port Mirroring Disabled
Note: Port Mirroring cannot be enabled until or unless user assigns the monitor and sniffer ports.
9.3 Limitation
• One port can monitor at a time.
• Source port and sniffer port must be the members of the same VLAN.
9.4 Web: Viewing Port Monitor status
In the web browser interface:
1. Click on the [Configuration]
2. Click on [Port].
3. Click on [Mirroring].
4. Click on [Modify] button.
5. After you make the desired changes, click on [OK] button.
6. Click [Save] to save the configuration.
To Next Page
Loading...
