MNS-BB Software User Guide
-74-
Bridge Max Age :20
Root Port :1
Root Path Cost :100
Designated Root :80:00:00:01:96:ed:a7:80
Designated Root Priority :32768
Root Bridge Forward Delay :15
Root Bridge Hello Time :2
Root Bridge Max Age :20
LE2425A(stp)##
13.7 Changing STP Bridge Parameter Values
To change bridge priority parameters, the user must be in STP CLI context. Using the command
priority value=<0-65535>.
LE2425A(stp)##show stp config
STP Configuration:
Spanning Tree Enabled(Global) :YES
Spanning Tree Enabled(Ports) :YES, 1,2,3,4,5,6,7,8
Bridge Priority :32768
Bridge Forward Delay :15
Bridge Hello Time :2
Bridge Max Age :20
Root Port :1
Root Path Cost :100
Designated Root :80:00:00:01:96:ed:a7:80
Designated Root Priority :32768
Root Bridge Forward Delay :15
Root Bridge Hello Time :2
Root Bridge Max Age :20
LE2425A(stp)##priority value=65535
Successfully set the bridge priority
To change bridge STP timing parameters, use the command time forward-delay=<4-30> hello=<1-
10> age=<6-40>.
LE2425A(stp)##time forward-delay=4 hello=1 age=6
Successfully set the bridge time parameters
LE2425A(stp)##show stp config
STP Configuration:
Spanning Tree Enabled(Global) :YES
Spanning Tree Enabled(Ports) :YES, 1,2,3,4,5,6,7,8
Bridge Priority :65535
Bridge Forward Delay :4
Bridge Hello Time :1
Bridge Max Age :6
Root Port :1
Root Path Cost :100
Designated Root :80:00:00:01:96:ed:a7:80
Designated Root Priority :32768
Root Bridge Forward Delay :15
Root Bridge Hello Time :2
Root Bridge Max Age :20
To Next Page
Loading...
