Black Box LEV2525A - Displaying the Configuration for a Particular VLAN; Creating a New Static VLAN; Changing the VLAN Context Level

MNS-BB Software User Guide
-84-
7 | DOWN
8 | DOWN
25 | DOWN
VLAN ID : 2
Name : Engg
Status : Active
========================
PORT | STATUS
========================
9 | UP
10 | DOWN
11 | DOWN
12 | DOWN
13 | DOWN
14 | DOWN
15 | DOWN
16 | DOWN
17 | DOWN
18 | DOWN
VLAN ID : 3
Name : Mktg
Status : Active
========================
PORT | STATUS
========================
18 | DOWN
19 | DOWN
20 | DOWN
21 | DOWN
22 | DOWN
23 | DOWN
24 | DOWN
15.4.2 Displaying the Configuration for a Particular VLAN
This command uses the VID to identify and display the data for a specific static VLAN.
Syntax: show vlan type=port [<id=vlanid>]
LE2425A# show vlan type=port id=2
VLAN ID : 2
Name : Engg
Status : Active
========================
PORT | STATUS
========================
9 | UP
10 | DOWN
11 | DOWN
12 | DOWN
13 | DOWN
14 | DOWN
15 | DOWN
16 | DOWN
17 | DOWN
18 | DOWN
15.5 Creating a New Static VLAN
15.5.1 Changing the VLAN Context Level.
With this command, entering a new VID creates a new static VLAN. Entering the VID or name of an
existing static VLAN places you in the context level for that VLAN.
Syntax: add id=<vlan Id> [name=<vlan name>] port=<number|list|range>