MNS-BB Software User Guide
-46-
3 -- -- -- --
4 -- -- -- --
5 -- -- -- --
6 -- -- -- --
7 -- -- -- --
8 -- -- -- --
9 -- -- -- --
10 -- -- -- --
LE2425A(snmpv3)##show-view id=1
View ID : 1
View Name : all
Type : included
Subtree : .1
Mask : ff
Syntax: access <add|delete> id=<id> [accessname=<name>]
[model=<v1|v2c|usm|any>] [level=<noauth|auth|priv>]
[read=<none|view-id>] [write=<none|view-id>] [notify=<none|view-id>]
[context=<none|context-string>] [prefix=<exact|prefix>]
This is also a part of VACM commands, the access command maps from group/security
model/security level to a view. A user can add up to 10 access entries.
LE2425A(snmpv3)##access add id=1 accessname=v1 model=v1 level=noauth read=1
write=none notify=none
Entry is added successfully
Syntax: show-access [id=<id>]
This command shows all or specific access entries.
LE2425A(snmpv3)##show-access
ID View Name Model Level R/View W/View N/View Context Prefix
== =============== ===== ====== ====== ====== ====== ========
1 v1 v1 noauth 1 none none "" exact
2 -- -- -- -- -- -- -- --
3 -- -- -- -- -- -- -- --
4 -- -- -- -- -- -- -- --
5 -- -- -- -- -- -- -- --
6 -- -- -- -- -- -- -- --
7 -- -- -- -- -- -- -- --
8 -- -- -- -- -- -- -- --
9 -- -- -- -- -- -- -- --
10 -- -- -- -- -- -- -- --
LE2425A(snmpv3)##show-access id=1
Access ID : 1
Access Name : v1
Sec. Model : v1
Sec. Level : noauth
Read View ID : 1
Write View ID : none
Notify View ID : none
Context : ""
Prefix : exact
To Next Page
Loading...
