10
Initial startup | Installation in the vehicle
The charging process in the switched-off state is
approx. 3 hours. The charge state indicator is lo-
cated on the top display bar.
The device is supplied by an external
power source.
The device is supplied by its internal
battery. The charge state of the bat-
tery is suffi cient.
The device is supplied by its internal
battery. The charge state of the bat-
tery is low.
If the charge state of the battery becomes weak,
the navigation device warns you about it.
Connect the battery charger or the charger
cable for the cigarette lighter to the charging
socket.
Note:
The battery is equipped with a protection
against overheating from excessive current
fl ow. The protection prevents charging the
battery starting at an ambient temperature
above 45 °C.
Switching on the device
A
Press and hold the On/Off switch for longer
than 1 second.
•
•
•
쏅
쏅
Setting the language
The device uses English as standard language. If
you switch on the device for the fi rst time, a dia-
logue menu is displayed in which you can select
another language for the menus and voice outputs
as well as for the speech input.
Select your preferred language in the dia-
logue menu.
Please follow the instructions.
The language is loaded and the main menu is
displayed.
Selecting a dataset
After the initial start of the navigation, you must
select a road map. The message "Data record not
available" is automatically displayed.
Touch the OK button.
A list of the available road maps is displayed.
Touch the desired road map in the list to se-
lect it.
Installation in the vehicle
For temporary installation in a vehicle, the navi-
gation device features a holder to attach it to
the windshield.
DANGER!
The installation at an unsuitable loca-
tion can cause injuries
Install the navigation device so that it does not
block your view and does not distract from the
traffi c.
Do not install the device in the airbag deployment
area.
Ensure that the device does not pose a threat to
passengers in the vehicle in case of emergency
braking.
Check the fi rm installation of the bracket at regular
intervals. The bracket can loosen due to changes
in the ambient temperature.
쏅
쏅
쏅
쏅
To Next Page
Loading...
