Destination input
17
Entering an address
Touch the symbol.
The Destination menu is displayed.
Note:
You do not have to repeat entering the country,
city and street information every time. Only if
your destination is at a different location than
the previous one will you have to re-enter the
destination address.
Touch the symbol to select a differ-
ent country.
Touch the symbol and enter the city
or postal code.
Touch the symbol and enter the
street.
Touch the symbol and enter the
house number.
- or -
Touch the symbol and enter the
street that intersects the previously
entered street.
Touch the Start Route Guidance button to
start the route guidance.
Note:
After the destination input, you can start the
route guidance or store the destination. For
further details, read the chapter "Additional
functions after the destination input".
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Entering coordinates
Touch the symbol.
The Destination Coordinates menu is
displayed.
Touch the symbol to enter the lati-
tude.
The keyboard is displayed.
Touch the symbol to enter the longi-
tude.
The keyboard is displayed.
The coordinates can be entered in decimal or
DMS format (Degrees, Minutes, Seconds).
Enter the coordinates in decimal format by
touching the number buttons, followed by the
comma buttons.
Enter the coordinates in DMS format by se-
lecting the cardinal point fi rst. To do so, touch
the N/S or E/W button.
Next, enter the coordinates with degrees (°)
and minutes (‘) via the keyboard.
Touch the OK button.
Touch the Start Route Guidance button.
Using the home address as
destination
Touch the symbol in the Navigation
menu.
The route guidance is being started.
Copying a destination from the map
Touch the symbol.
The map is displayed.
Move and scale the map as described in the
chapter "Working with the map".
Touch a location of your choice.
The city is selected and the address or the
coordinates are displayed. It is also pos-
sible to display several addresses.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
To Next Page
Loading...
