Performing basic settings
15
Entering the home address
Touch the symbol in the main
menu.
The map is displayed.
Touch the symbol.
The Navigation menu is displayed.
Touch the symbol.
The Destination Input menu is dis-
played.
Touch the symbol.
The Destination Input For Home
Address menu is displayed.
Touch the symbol to enter a new ad-
dress as described in the chapter
"Destination input", "Entering an
address".
Note:
The confi gured home address can be viewed
at any time in the Destination Input For Home
Address menu and changed, if necessary
(Change button).
Activating the PIN query
The PIN query allows you to lock out unauthorised
persons from using the device. Hence, every time
you switch on the device, the PIN (Personal Iden-
tifi cation Number) you confi gured for yourself is
requested. The PIN can be changed at any time.
If you should forget the PIN, you can unblock the
device again with the PUK (Personal Unblocking
Key) which you defi ne yourself. The PUK cannot
be changed.
To secure your PUK:
Register on the Blaupunkt Internet page and
follow the instructions:
http://puk.blaupunkt.com
Note:
During the PIN entry, you have only 3 attempts
to enter the correct PIN or subsequently 3 at-
tempts to enter the correct PUK. If you enter
an incorrect PUK for the 3rd time, your device
is permanently blocked and the device must
be returned to the Blaupunkt service.
쏅
쏅
쏅
쏅
쏅
쏅
Confi guring the PIN query
Touch the symbol in the main
menu.
The Settings menu is displayed.
Touch the button to scroll
through this menu.
Touch the symbol.
The Anti-Theft Protection menu is
displayed.
Touch the Anti-theft Protection button.
Touch the OK button.
The PIN query is displayed.
Follow the instructions and enter a self-se-
lected PIN.
Touch the OK button.
The initial confi guration of the PIN is followed by a
request to enter a PUK. The PUK is used to unlock
the device if you should forget the PIN.
Follow the instructions and enter a self-se-
lected PUK.
Touch the OK button.
Locking/unlocking the device
Prerequisite:
You confi gured the PIN query.
In the Anti Theft Protection menu, touch the
Anti-Theft Protection button to lock the de-
vice (check mark) or to unlock it (no check
mark).
The PIN query is displayed.
Enter your PIN.
Touch the OK button.
Changing the PIN
In the Anti Theft Protection menu, touch the
Change PIN Code button.
The PIN query is displayed.
Follow the instructions and enter a new self-
selected PIN.
Touch the OK button.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
•
쏅
쏅
쏅
쏅
쏅
쏅
To Next Page
Loading...
