BMC H-80 Series User Manual

H-80 Series User Manual V1.0
29 / 46
Option
Range
Description
Filter Recur.
Auto/3 months/ 6
months/ 1 year
Set filter replacement prompt, and it can modify
the service cycle of the filter.
Filter Reset
——
The service time of the filter returns to zero
through this function.
Date
2000-01-01
—
2099-12-31
Set date by adjusting this option.
Time
00:00
—
23:59
Set time by adjusting this option.
Time Format
12-hour / 24-hour
Turn the Knob to choose between the two
time formats. The default setting is ―12-hour‖.
Date Format
yy mm dd / mm dd
yy / dd mm yy
Turn the Knob to choose among three date
formats. The default setting is ―mm dd yy‖.
Backlight
Auto / On
The backlight of the LCD screen can be set to
―Auto‖ or ―On.‖ Turn the Knob to choose
between the two modes. If it is set to ―Auto,‖ the
backlight will turn off automatically after two
minutes of inactivity. If it is set to ―On,‖ the
backlight will always be on. The default setting is
―Auto‖.
Language
English /
中文（简体）
Turn the Knob to choose among the two
languages available. The setting is only valid
when the device is inserted a SD card with
language pack. The default setting is ―English‖.
Note: Only languages included in SD Card can be
switched.
Run Time
——
Show the actual total operation time of the
device.
Service
——
Specially hidden, activate the specific function
through password.
Restore
Defaults
——
Restore default settings.
Erase Data
——
Erase use data.
About
——
Show the relevant information about the device,
this is only for users to view, can not be modified.
Model: the device model; SN: Serial Number of
the device; Firmware version: Software version of
the device; ID: Contains information such as
gallery and language; PIN: Personal identification
code.

BMC H-80 Series Specifications

General

Brand	BMC
Model	H-80 Series
Category	Medical Equipment
Language	English