H-80 Series User Manual V1.0
38 / 46
prevent disinfectant residuals from damaging the skin or respiratory tract or causing allergies.
• The device shall not be serviced or maintained while in use with a patient.
• Sterilization of this device and its components other than recommended is not permitted.
• The LH2 Heated Breathing Tube , water chamber and the water chamber adapter cannot
be disinfected. LH2 Heated Breathing Tube, water chambers, patient interfaces and the
water chamber adapter can only be used by single patient.
CAUTIONS!
• Disinfectants tend to damage materials and reduce the life of components. Try to select the
appropriate disinfectant, and follow the disinfectant manufacturer's instructions and
recommendations.
• After disinfection, check the disinfected component for any signs of damage. Replace any
damaged component immediately.
16. Reordering
Contact your home care provider to order accessories or replacement filters.
The device does not require routine servicing.
WARNINGS!
• If you notice any unexplained changes in the performance of the device, if it is making
unusual or harsh sounds, if it has been dropped or mishandled, if the enclosure is broken, or
if water has entered the enclosure, discontinue use. Contact your home care provider.
• If the device malfunctions, contact your home care provider immediately. Never attempt to
open the enclosure of the device. Repairs and adjustments must be performed by
BMC-authorized service personnel only. Unauthorized service could cause injury, invalidate
the warranty, or result in costly damage.
• If necessary, contact your local authorized dealer or BMC Medical Co., Ltd. for technical
support and documents.
17. Technical Support
Please contact BMC directly if you need the circuit diagram of the device and the list of
components for certain purposes such as maintenance or connection to other equipment.
BMC will provide the circuit diagram and / or other technical documents in whole or in part
according to your needs.
18. Disposal
When the device reaches the end of its service life, dispose of the device and packaging in
accordance with local laws and regulations.
To Next Page
Loading...
Need help?
General
