The front wheel must be
installed right way round to
rotate in the correct direction.
Note the direction-of-rotation ar-
rows on the tyre or the wheel
rim.
Roll the front wheel into posi-
tion between the front forks.
Raise the front wheel, insert
quick-release axle 2 and
tighten to specified torque.
Quick-release axle in
threaded bush
50 Nm
Tighten right axle clamping
screws 1 to the specified tight-
ening torque.
Clamping screws in axle
holder
Tightening sequence: Tighten
screws six times in alternate
sequence
19 Nm
Remove the front-wheel stand
and the auxiliary stand.
Ease the brake calipers on to
the brake discs.
Tighten screws 2 on left and
right to the specified tightening
torque.
Radial brake caliper to
axle mount
38 Nm
9
146
z
Maintenance
To Next Page
Loading...
